manualshive.com logo in svg

Kyocera Taskalfa Pro 15000c, Operation Manual, Page: 70 / 576

Share
Download
Kyocera Taskalfa Pro 15000c Operation Manual Download Page 70

3-11

Installing and Setting up the Machine > Network Setup

Network Setup

The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), 
TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms.

Set up TCP/IP (IPv4) to connect to the Windows network.

Be sure to connect the network cable before configuring the settings.

Connecting Network Cable (page 3-3)

The configuration methods are as follows:

For other network settings, refer to the following:

Network Settings (page 15-46)

IPv4 setting

1

Display the screen.

[

System Menu/Counter

] key > [

Network Settings

] > [

Wired Network Settings

] > [

IPv4 

Settings

]

2

Configure the settings.

When using DHCP server

• [

DHCP

]: Set to [

On

].

When setting the static IP address

• [

DHCP

]: Set to [

Off

].

• [

Auto-IP

]: Set to [

Off

].

• [

IP Address

]: Enter the address.

• [

Subnet Mask

]: Enter the subnet mask in decimal representation (0 to 255).

• [

Default Gateway

]: Enter the address.

When using the Auto-IP

Enter "0.0.0.0" in [

IP Address

].

When setting the DNS server

In the following cases, set the IP address of DNS (Domain Name System) server.

Configuration Method

Description

Reference Page

Configuring the Connection 
from the Operation Panel 
on This Machine

Use Quick Setup Wizard when configuring the 
network in a wizard-style screen, without setting 
individually in System menu.

Quick Setup Wizard (page 3-
13)

Configuring Connections 
on the Web Page

For the equipped network interface, the connection 
can be set by using Command Center RX.

Command Center RX User 
Guide

NOTE

If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
If user login administration is disabled, the user authentication screen appears. Enter a login user name and 
password, and select [

Login

].

The factory default login user name and login password are both set as 15000.

Summary of Contents for Taskalfa Pro 15000c

































































































































































































































































































































































































































































































































































































Reviews:

No comments