12-14
Box Function > Using Document Boxes
Sending Documents in Custom Box
1
Display the screen.
[
Home
] key > [
Custom Box
] > Select the box
2
Send the document.
1
Select the document you wish to send by checking the checkbox.
The document is marked with a checkmark.
2
Select [
Send
].
3
Set the destination.
For more information on selecting destinations, refer to the following:
Specifying Destination (page 4-15)
4
Set the sending size, original image, etc., as desired.
For the features that can be set, refer to the following:
5
Press the [
Start
] key.
Sending of the selected document begins.
NOTE
If a custom box is protected by a password, enter the correct password.
NOTE
• You cannot select and send multiple documents.
• To deselect, select the checkbox again and remove the checkmark.
NOTE
Depending on the settings, the address book screen may appear.