11-14
Scanning > Sending to Different Types of Destinations (Multi Sending)
Procedure from Your Computer
1
[
From Computer
] > [
Start
]
2
Use the software installed on the computer to send the images.
Sending to Different Types of Destinations
(Multi Sending)
You can specify destinations that combine E-mail addresses and folders (SMB or FTP). This is referred to as Multi
Sending. This is useful for sending to different types of destination (E-mail addresses, folders, etc.) in a single operation.
No. of broadcast items: Up to 500
However, number of items are restricted for the following sending options.
• E-mail: Up to 100
• Folders (SMP, FTP): Total of 10 SMB and FTP
Also, depending on the settings, you can send and print at the same time.
Procedures are the same as used in specifying the destinations of respective types. Continue to enter E-mail address or
folder path so that they appear in the destination list. Press the [
Start
] key to start transmission to all destinations at one
time.
Canceling Sending Jobs
1
Select the [Stop] key with the send screen displayed.
2
Cancel a job.
When there is a job is being scanned
Job Cancel appears.
When there is a job sending or on standby
Canceling job screen appears.
Select the job you wish to cancel > [
Cancel
] > [
Yes
]
NOTE
Selecting the [
Stop
] key will not temporarily stop a job that you have already started sending.