Kyocera TASKalfa 7353ci, Operation Manual

Page: 540 / 723

10-7
Troubleshooting > Regular Maintenance
Toner Container Replacement
When toner is empty, the following message will be displayed.
"Toner [C][M][Y][K] are empty."
When toner runs low, the following message will be displayed. Make sure you have a new toner container available for
replacement.
"Toner is low. [C][M][Y][K] (Replace when empty.)"
Installation procedures of the toner container is same for every color. Here, we'll explain the procedures for the yellow
toner container, as an example.
1
Tilt the operation panel upwards and open the front cover.
The cover of the empty toner container is open.
2
Turn the toner container release lever to the vertical position.
NOTE
• For the toner container, always use a genuine toner container. Using a toner container that is not genuine may
cause image defects and product failure.
• The memory chip in the toner container of this product stores information necessary for improving customer
convenience, operation of the recycling system for used toner containers, and planning and development of new
products. The stored information does not include information that makes it possible to identify individuals, and is
only used anonymously for the above purposes.
CAUTION
Do not attempt to incinerate parts which contain toner. Dangerous sparks may cause burns.
NOTE
If you close the toner container cover before replacing the container, select [ Open Toner
Container Cover ].