6-50
Using Various Functions > Functions
Form Overlay
Prints the original document overlaid with a form or image.
Once you scan and register the form, the form is overlaid onto the original. You can also use a form that is already
registered in the Document Box.
Place the original for the form on top of the other originals. When using the optional document processor, the first page
of the originals should be placed on the top.
Item
Value
Description
Off
Select Stored
Form
Density
10% to 100%
Specify the density of the form to be
overlaid.
Select [
+
] or [
-
] in "Density".
Finishing
Image
Transparent
The form is overlaid on the document.
Form on Original Image
The form is placed on top of the document.
Original Image on Form
The form is placed under the document.
Select Form
*1
*1 Form must be previously registered in Job Box.
Form for Form Overlay (page 5-62)
―
Select the form to be overlaid from
Document Box.
Select [
Select Form
] to display the
Document Box that store documents
which can be used as a form. Select the
desired form from the list and select [
OK
].
Scan New
Form
*2
*2 Not displayed when printing from the custom box.
Density
10% to 100%
Specify the density of the form to be
overlaid.
Select [
+
] or [
-
] in "Density".
Finishing
Image
Transparent
The form is overlaid on the document.
Form on Original Image
The form is placed on top of the document.
Original Image on Form
The form is placed under the document.
Copy
Layout/Edit
Custom
Box
Functions
Original
Copy
Form
Density:
30%
Density:
100%
