manualshive.com logo in svg

Kyocera TASKalfa 7002i, Operation Manual

Share
Download
Kyocera TASKalfa 7002i Operation Manual Download Page 320

6-46

Using Various Functions > Functions

Duplex

Produces two-sided copies. You can also create single-sided copies from two-sided originals.

The following modes are available.

One-sided to Two-sided

Two-sided to One-sided

Two-sided to Two-sided

 

Produces two-sided copies from one-sided originals. In case of an odd 
number of originals, the back side of the last copy will be blank.

 

The following binding options are available.

A Binding Left/Right: Images on the second sides are not rotated.

B Binding Top: Images on the second sides are rotated 180 degrees. 

Copies can be bound on the top edge, facing the same orientation 
when turning the pages.

 

Copies each side of a two-sided original onto two individual sheets. Place 
originals in the document processor.

The following binding options are available.

•  Binding Left/Right: Images on the second sides are not rotated.
•  Binding Top: Images on the second sides are rotated 180 degrees.

 

Produces two-sided copies from two-sided originals. Place originals in the 
document processor.

NOTE

The paper sizes supported in Duplex mode: A3, A4-R, A4, A5-R, B4, B5-R, B5, 216×340 mm, Ledger, Letter-R, Letter, 
Legal, Statement-R, Executive, Oficio II, Folio, 8K, 16K-R and 16K.

Copy

Layout/Edit

Custom

Box

Functions

USB

Memory

Functions

Original

Copy

ghi

def

abc

ghi

abc

def

ghi

abc

def

Original

Copy

A

B

Original

Copy

Original

Copy

Summary of Contents for TASKalfa 7002i






































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands