Kyocera TASKalfa 3212i, Operation Manual

Page: 437 / 616

9-7
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Password Policy Settings
You can prohibit the setting and use of passwords that do not comply with the password policy.
Setting the Password Policy makes it more difficult to break the password.
1
Display the screen.
1
[ System Menu/Counter ] key > [ User Login/Job Accounting ]
2
"User Login Setting" [ Next ] > "Authentication Security" [ Next ] > "Password Policy Settings"
[ Next ]
2
Configure the settings.
The following settings can be selected.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login ]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item Descriptions
Password Policy Select whether or not password policy is enabled.
Value : Off, On
Minimum password
length Set the minimum password length of characters for password.
Value : Off, On (1 to 64 characters)
Password complexity Set the password complexity.
Value
No more than two consecutive identical char: Off, On
At least one uppercase letter (A-Z): Off, On
At least one lowercase letter (a-z): Off, On
At least one number (0-9): Off, On
At least one symbol: Off, On
Maximum password
age Set the maximum password age.
Value : Off, On (1 to 180 days)
Policy Violated User
List List of users do not meet password policy requirements.
Model Name Login User Name Login Password
3212i 3200 3200
4012i 4000 4000