Kyocera TASKalfa 307ci Operation Manual Download Page 187

Page: 187 / 462

5-22

Operation on the Machine > Sending Document to Desired Shared Folder on a Computer (Scan to PC)

Sending Document to Desired Shared

Folder on a Computer (Scan to PC)

You can store the scanned document into the desired shared folder on a computer.

Configuring Settings before Sending

Before sending an document, configure the following settings.

• Make a note of the computer name and full computer name

• Make a note of the user name and domain name

• Create a shared folder and make a note of a shared folder

• Configure the Windows firewall

Sending Document to Desired Shared Folder on a

Computer

Follow the steps as below for sending a document to the desired shared folder on a computer.

[Home] key > [Send]

Place the originals.

Place the originals.

In the basic screen for sending, select [Folder].

Select [SMB] from the folder type.

Making a Note of the Computer Name and Full Computer Name (page 3-12)

Making a Note of the User Name and Domain Name (page 3-13)

Creating a Shared Folder, Making a Note of a Shared Folder (page 3-14)

Configuring Windows Firewall (page 3-18)

Loading Originals (page 5-2)

Summary of Contents for TASKalfa 307ci















































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 307ci

Reviews:

Kyocera TASKalfa 307ci, Operation Manual, Page: 187 / 462

Search results

Summary of Contents for TASKalfa 307ci

Reviews: