manualshive.com logo in svg

Kyocera TASKalfa 3050ci, Service Manual, Page: 145 / 936

Share
Download
Kyocera TASKalfa 3050ci Service Manual Download Page 145

2LK/2LN/2LM/2LC-2

1-3-51

U061

Checking the operation of the exposure lamp

Description

Lights the exposure lamp.

Purpose

To check whether the exposure lamp are turned on.

Method

1. Press the start key.
2. Select the item. 

3. Press the start key. The lamp lights.
4. To turn the lamp off, press the stop key.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U063

Adjusting the shading position

Description

Changes the shading position of the scanner.

Purpose

Used when the white line continue to appear longitudinally on the image after the shading plate is 
cleaned.
This is due to flaws or stains inside the shading plate. To prevent this problem, the shading posi-
tion should be changed so that shading is possible without being affected by the flaws or stains.

Setting

1. Press the start key.
2. Change the setting value using the +/- keys or numeric keys.

Increasing the value moves the shading position toward the machine left, and decreasing it 
moves the position toward the machine right.

3. Press the start key. The value is set.

Supplement

While this maintenance item is being executed, copying from an original is available in interrupt 
copying mode (which is activated by pressing the system menu key).

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Item No.

Description

Display

Description

CCD

The exposure lamp lights

CIS

The CIS lights (when dual scan DP is installed)

Display

Description

Setting 

range

Initial 

setting

Change in 

value per step

Position

Shading position

0 to 18

0

0.158 mm

Summary of Contents for TASKalfa 3050ci









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments