Kyocera TASKalfa 3011i Page 247 Operation Manual Download

Page: 247 / 607

5-55

Operation on the Machine > Using Document Boxes

Printing Documents in Custom Box

Display the screen.

[

Home

] key > [

Custom Box

]

Select the box containing the document you want to print.

Select [

Open

Print the document.

Select the document in the list that you want to print by selecting the checkbox.

The document is marked with a checkmark.

Select [

Print

Set the paper selection, duplex printing, etc., as desired.

For the features that can be selected, refer to the following:

If a document stored from a computer is selected, the print settings selection screen
appears.

• To use the settings used at the time of printing (when the document was saved), select

[

Print As Is

]. Select [

Start Print

] to start printing.

• To change the print settings, select [

Print after Change Settings

] and change the print

settings.
After a document saved in the machine is selected, the [

Use File Settings

] key may

appear in the setting screen for the feature to be used.

• To use the settings saved with the document, select [

Use File Settings

• If you need to change the print settings, select [

Print after Change Settings

Press the [

Start

] key.

Printing of the selected document begins.

NOTE

If a custom box is protected by a password, enter the correct password.

NOTE

To deselect, select the checkbox again and remove the checkmark.

Custom Box (Store File, Printing, Send) (page 6-8)

NOTE

Select the [

Program

] tab when registering or recalling programs.

Registering Programs (page 5-10)

Recalling Programs (page 5-10)

Summary of Contents for TASKalfa 3011i
































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands

Kyocera TASKalfa 3011i, Operation Manual

Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands