2H0/2HZ
1-3-94
Adding a destination on One-touch Key
Add a new destination (individual or group).
1. Press [Register/Edit] of One-touch Key.
2. Select a One-touch Key number (001 to 100) for
the destination. Pressing [No.] enables direct entry
of a One-touch Key number.
3. Press [Register/Edit]. The address book appears.
4. Select a destination (individual or group) to add to
the One-touch Key number.
5. Press [OK].
(12) User login administration
User login administration specifies how the user access
is administered on this machine.
Enabling/Disabling User Login Administration
Enable user login administration.
1. When user login administration is invalid, the user
authentication screen is displayed. Enter a login
user name and password, and press [Login].
Initial setting: 3060 respectively
2. Press [Next] of User Login Setting and then
[Change] of User Login.
3. Select [Off], [Local Authentic.] or [Network Authen-
tic.].
When selecting [Network Authentic.], enter the host
name (62 characters or less) and domain name
(254 characters or less) for the Authentication
Server.
Select [NTLM(WinNT)] or [Kerberos(Win2000/
2003)] as the authentication method.
4. Press [OK].
Adding a user
Add a new user.
1. When user login administration is invalid, the user
authentication screen is displayed. Enter a login
user name and password, and press [Login].
2. Press [Next] of User Login Setting, [Register/Edit]
of Local User List, and then [Add].
3. Press [Change] of User Name.
4. Enter the user name and press [OK].
5. Enter the login user name and E-mail address.
6. Press [Change] of Password and then [Password].
7. Enter the password and press [OK].
8. Press [Confirm Password].
9. Enter the same password to confirm and press
[OK].
10. Press [Change] of Access Level.
11. Select the user access privilege and press [OK].
12. Press [Change] of Account Name.
13. Select the account and press [OK].
14. Press [Register].
Unknown login user name job
This specifies the behavior for handling the jobs sent with
unknown login user names.
1. When user login administration is invalid, the user
authentication screen is displayed. Enter a login
user name and password, and press [Login].
2. Press [Change] of Unknown lD Job.
3. Press [Reject] or [Permit].
4. Press [OK].
Summary of Contents for KM-2560
