37
Using the Printer
Navigating through the menus
The menus are in the hierarchy as shown in the diagram above. Use the
+
and
-
keys to
move between menus in the same level (“vertically” in the table). The
+
key shows the
next menu, while the
-
key shows the previous one. Change levels by using the
and
keys. The
key moves to lower levels (sub-menus), while the
key moves to higher
levels.
To change a specific item, for example, the sleep mode timeout time, proceed as follows:
1
Press the
MODE
key.
The message display will show one of the first level menus (
Level 1
in the table on
pages 34 to 36) depending on the previous selection.
2
Press
+
until
Others >
is shown on the display.
3
Press .
The message display will show one of the second level menus (
Level 2
in the table
on pages 34 to 36) belonging to the Others menu above depending on the previous
selection.
4
Press
+
until
Sleep timer
is shown on the display.
5
To change the timeout value, press
ENTER
.
If you want to abandon setting, press
CANCEL
, then press
MODE
.
6
Press
+
repeatedly to increase the timeout time; press
-
repeatedly
to decrease the timeout time until the desired timeout time (in
minutes) is displayed.
7
Press
ENTER
to confirm the new setting.
You can abandon the new setting by pressing
CANCEL
, then
MODE
.
8
To quit the mode selection sequence, press
EXIT
.
(2), (4), (6)
(3)
(5), (7)
(1), (8)
