Kyocera FAX System 10, Operation Manual

Page: 68 / 265

3-21
Sending Faxes > Original Size
Original Size
Specify the original size to be scanned.
Select [ Auto ], [ Metric ], [ Inch ], [Others] or [ Size Entry ] to select the original size.
Mixed Size Originals
Scan the documents of different sizes that are set in the document processor all at once. Different Width is not displayed
in inch models.
2-sided/Book Original
Select the type and orientation of the binding based on the original.
Item Value Description
Auto - Have the size of original detected
automatically.
Metric A4, A5, A6, B5, B6, Folio, 216 x 340 mm Select from the Metric series standard
sizes.
Inch Letter, Legal, Statement, Executive, Oficio II Select from the Inch series standard
sizes.
Others 16K, ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5, Hagaki
(Cardstock), Oufukuhagaki (Return postcard), Youkei 4,
Youkei 2, Custom 1-4
*1
*1 For instructions on how to specify the custom original size, refer to the following:
Machine’s Operation Guide
Select from special standard sizes and
custom sizes.
Size Entry Metric
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments) Enter the size not included in the
[Metric], [Inch], [Others].
*2
When you have selected [Size Entry],
select [+] or [-] to set the sizes of "X"
(horizontal) and "Y" (vertical). Select
the entry field to use the numeric keys
for entry.
*2 The input units can be changed in System Menu. For details, refer to the following:
Machine’s Operation Guide
Inch
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
NOTE
Be sure to always specify the original size when using custom size originals.
Item Value Description
Mixed Size Originals Off
Same Width Scans and sends multiple sheets of the
same width using the document processor.