Kyocera FAX System 10, Operation Manual

Page: 202 / 265

8-15
Fax Settings > Default FAX settings
Fax Remote Diagnosis
[System Menu/Counter] key > [ Function Settings ] > [Fax/iFax] > [Fax Remote Diagnosis]
Display Fax Log
[System Menu/Counter] key > [ Function Settings ] > [Fax/iFax] > [Display Fax Log]
Prevent Mis-sending Settings
[System Menu/Counter] key > [ Function Settings ] > [Fax/iFax] > [Prevent Mis-sending Settings]
Item Description
Fax Speaker Volume Adjust the volume of the speaker.
Fax Speaker Volume (page 8-6)
Fax Monitor Volume Adjust the volume of the monitor.
Fax Monitor Volume (page 8-6)
Job Finish Emit a sound when a job is normally completed.
Job Finish (page 8-6)
Item Description
Fax Remote Diagnosis If a problem arises with this machine and you contact our service representative, this
feature enables our Service Center computer to access the machine over the phone
and check the machine’s status or look for problems.
NOTE : To use Remote Diagnostics, you must first sign an agreement with our
service representative and register a Predetermined ID on the machine. For more
information, contact your Service Representative or Authorized Service Center.
Value : On, Off
Remote Diagnostics
ID If you have turned on Remote Diagnostics, enter the predetermined ID.
Value : 0000 - 9999
Item Description
Display Fax Log Set the display method of the Status/Log.
Value : Show All, Hide All
Item Description
Destination Check before
Send Select whether to display the confirmation screen of destinations after pressing the [ Start ] key
when performing sending jobs.
Value : Off, On
Entry Check for New Dest. When adding new destination, select whether to display the entry check screen to check the
entered destination.
Value : Off, On
New Destination Entry
(Fax)
Select whether to permit direct entry of destination. When this option is set to
[ Prohibit ], you cannot enter the destination directly.
Value : Prohibit, Permit
Recall Destination Select whether to permit usage of [ Recal l] on the Send screen.
Value : Prohibit, Permit
Broadcast
Set whether to enable broadcast.
Value : Prohibit, Permit