7-3
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
1
Display the screen.
1
[
Menu
] key > [▲] [▼] key > [
User/Job Account
] > [
►
] key
2
Enter the administrator ID and select the [
OK
] key.
3
Enter the administrator password and select the [
OK
] key.
4
[▲] [▼] key > [
User Login Set.
] > [
►
] key
2
Configure the settings.
[▲] [▼] key > [
Login Type
] > [
OK
] key > [▲] [▼] key > [
Netwk Authentic.
] > [
OK
] key
NOTE
This functions appears when the Card Authentication Kit is activated.
Card Authentication Kit(B) "Card Authentication Kit" (page 9-2)
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator ID is set as 2100.
NOTE
Enter a password consisting of between 0 (no settings) and 16 digits.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is set as 2100.
NOTE
Select [
Off
] to disable user login administration.
