Kyocera ECOSYS P6230cdn Operation Manual Download

Page: 164 / 258

7-27

Setup and Registration (System Menu) > System Menu

Data Security

[

Menu

] key > [

▲

] [

▼

] key > [

Security

] > [

►

] key > [

▲

] [

▼

] key > [

Data Security

] > [

►

] key

Configure settings for data stored in the machine's memory.

User/Job Account

[

Menu

] key > [

▲

] [

▼

] key > [

User/Job Account

] > [

►

] key

Configure settings related to machine management.

Overview of User Login Administration (page 8-2)

Overview of Job Accounting (page 8-6)

Unknown ID Job (page 8-20)

Administrator

[

Menu

] key > [

▲

] [

▼

] key > [

Administrator

] > [

►

] key

The Administrator setting is a function that identifies a user who can use the printer and manage other users.

Administrator settings (page 8-21)

Item

Description

DataSanitization

Return the following information registered in the machine to the factory defaults.
•

System settings

•

Data saved in Custom Box

•

Optional applications

IMPORTANT

Data saved in an application or SD card cannot be erased. To erase data on an SD card,
you must format the SD card.

SD Card (page 7-21)

NOTE

•

Once in progress, the processing cannot canceled.

•

Before executing this function, disconnect modular, network, and other cables.

•

Before performing this function, set all interface block settings to [

Unblock

I/F Block (page 7-25)

•

Do not turn off the main power switch while sanitizing the data. If the main power is turned
off during data erasing, erasing will be executed automatically when the power is restored,
however, complete erasure cannot be guaranteed.

Run Immediately

Data Sanitization will be performed.

Schedule

Completely erase address and image data saved in the device at the scheduled time.

Value

: Off, On

If [

] is selected, set the date and time that sanitization is to be performed. The setting range

is Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23).

Device Use

The device use restriction after the data sanitization is completed.
The device cannot be used if [

Prohibit

] is selected.

Value

: Permit, Prohibit

Summary of Contents for ECOSYS P6230cdn



































































































































































































































































Search results

Summary of Contents for ECOSYS P6230cdn

Reviews:

Related manuals for ECOSYS P6230cdn

Brands by name

Popular brands

Kyocera ECOSYS P6230cdn, Operation Manual

Search results

Summary of Contents for ECOSYS P6230cdn

Reviews:

Related manuals for ECOSYS P6230cdn

Brands by name

Popular brands