Kyocera ECOSYS P4140dn Operation Manual Download Page 39

Page: 39 / 276

2-8

Installing and Setting up the Machine > Connecting Cables

Connecting USB Cable

Connect the cable to the machine.

Connect the USB cable to the USB interface connector located on the left side of the body.

Connect the other end of the cable to the PC.

Power on the machine.

Connecting the Power Cable

Connect the cable to the machine.

Connect one end of the supplied power cable to the machine and the other end to a power
outlet.

IMPORTANT

If the power is on, turn the power switch off.

Power Off (page 2-9)

IMPORTANT

Only use the power cable that comes with the machine.

Summary of Contents for ECOSYS P4140dn





















































































































































































































































































Search results

Summary of Contents for ECOSYS P4140dn

Reviews:

Related manuals for ECOSYS P4140dn

Brands by name

Popular brands

Kyocera ECOSYS P4140dn, Operation Manual

Search results

Summary of Contents for ECOSYS P4140dn

Reviews:

Related manuals for ECOSYS P4140dn

Brands by name

Popular brands