Kyocera ECOSYS P2335d, Operation Manual

Page: 28 / 170

2-6
Installing and Setting up the Machine > Connecting the Machine and Other Devices
Connecting the Machine and Other Devices
Prepare the cables necessary to suit the environment and purpose of the machine use.
When Connecting the Machine to the PC via USB
When Connecting the Machine to the PC or Tablet by network cable, Wi-Fi, or Wi-Fi direct
Cables that Can Be Used
NOTE
If you are using wireless LAN, refer to the following.
Configuring the Wireless Network (page 2-15)
Connection Environment Function Necessary Cable
Connect a LAN cable to the
machine. Printer LAN cable (10BASE-T, 100BASE-TX,
1000BASE-T)
Connect a USB cable to the
machine. Printer USB 2.0 compatible cable (Hi-Speed USB
compliant, max. 5.0 m, shielded)
IMPORTANT
Using a cable other than a USB 2.0 compatible cable may cause failure.
USB
Tablet
Network
Network cable
connection
*2
Wi-Fi
connection
*1
Wi-Fi Direct
connection
*1
Wi-Fi access point
*1 Only for models with Wi-Fi. Wi-Fi connection or
Wi-Fi Direct connection
*2 Only for models with the network