Kyocera ECOSYS MA2100cfx, Operation Manual, Page: 264 / 408

8-20
Setup and Registration (System Menu) > System Menu
Display Bright. (Display Brightness)
[ System Menu/Counter ] key > [ ▲ ] [ ▼ ] key > [ Common Settings ] > [ OK ] key > [ ▲ ] [ ▼ ] key > [ Display Bright. ] > [ OK ] key
Orig./Paper Set.
[ System Menu/Counter ] key > [ ▲ ] [ ▼ ] key > [ Common Settings ] > [ OK ] key > [ ▲ ] [ ▼ ] key > [ Orig./Paper Set. ] > [ OK ] key
Configure settings for originals.
Item Description
Display Bright. Set the brightness of the message display.
Value : Darker -3, Darker -2, Darker -1, Normal 0, L1, L2, L3
Item Description
Custom Orig. Size Set up frequently-used custom original size.
The custom size option is displayed on the screen to select original size.
Value
Metric
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
Inch
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
X=Length, Y=Width
Detect Orig.(DP) Select whether to automatically detect originals of the document processor.
Auto Detect Select whether to enable automatic detection of original size.
Value : off, on
System of Units Select metric or inch for the unit of original size detection.
Value : Metric, Inch
LGL/OFII/216x340 As Legal, OficioII and 216 x 340 mm are similar in size, select either one of them for automatic
detection.
Value : Legal, OficioII, 216 x 340 mm
NOTE
When [ Auto Detect ] is set to [ Off ], this function will not be displayed.
When [ System of Units ] is set to [ Metric ], this function will not be displayed.
Def. Orig. Size Set the default original size.
Value : Off
*1
, A4, A5, A6, B5, B6, Letter, Statement, Executive, 16K
*1 This function is displayed when [ Auto Detect ] in [ Detect Orig.(DP) ] is set to [ On ].
Horizontal