Kyocera ECOSYS MA2100cfx, Operation Manual, Page: 257 / 408

8-13
Setup and Registration (System Menu) > System Menu
IPP Over SSL Select whether or not to use IPP over SSL.
*1, *3
Value : Off, On (Port Number: 1 to 32767)
NOTE
When selecting [
On
], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value : Disable, Enable
NOTE
This function is displayed when [ IPP Over SSL ] is set to [ On ].
Wi-Fi
*2
Wired Network
HTTP
Select whether to communicate using HTTP.
*1
Value : Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value : Disable, Enable
NOTE
This function is displayed when [
HTTP
] is set to [
On
].
Wi-Fi
*2
Wired Network
HTTPS Select whether to communicate using HTTPS.
*1, *3
Value : Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value : Disable, Enable
NOTE
This function is displayed when [ HTTPS ] is set to [ On ].
Wi-Fi
*2
Wired Network
LDAP
Select whether to use LDAP.
Value : Off, On
ThinPrint Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to [ On ]. The
default port number is 4000.
*1, *3
Value : Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
Thin Print over SSL To use the Thin Print over SSL protocol, set [ Thin Print Over SSL ] to [ On ].
*1, *3
Value : Off, On
NOTE
• This function is displayed when [ ThinPrint ] is set to [ On ].
• When selecting [ On ], it also requires a certificate for SSL. The default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value : Disable, Enable
NOTE
This function is displayed when [ ThinPrint ] is set to [ On ].
Wi-Fi
*2
Wired Network
Item Description