manualshive.com logo in svg

Kyocera ECOSYS M3860idn, Operation Manual

Share
Download
Kyocera ECOSYS M3860idn Operation Manual Download Page 303

8-6

Setup and Registration (System Menu) > System Menu

Admin Report Settings

[

System Menu/Counter

] key > [

Report

] > [

Admin Report Settings

]

Configure settings for fax functions.

FAX Operation Guide

Font List

Prints the font list, allowing you to check the font samples installed in the machine.

Network Status

Prints the network status, allowing you to check the information including network interface 
firmware version, network address and protocol. 

Service Status

Prints the service status. More detailed information is available than on the Status Page. 
Service personnel usually print the service status pages for maintenance purpose.

Accounting Report

Prints the accounting report, allowing you to check the accounts that have been registered on 
the machine.

Sub Address Box List

Prints the report on the FAX function.

FAX Operation Guide

FAX List (Index)

FAX List (No.)

One Touch List (All)

One Touch List (FAX)

Outgoing FAX Report

Incoming FAX Report

Optional Network Status

Prints the optional network status, allowing you to check the information including optional 
network interface firmware version, network address and protocol.

NOTE

This function is displayed when the optional Network Interface Kit or Wireless Network 
Interface Kit is installed.

Data Sanitization Report

Prints the data sanitization report.

Item

Description

Network Status Page

Summary of Contents for ECOSYS M3860idn




































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands