Kyocera ECOSYS M3860idn Operation Manual Download Page 216

Page: 216 / 483

5-25

Operation on the Machine > Sending

Checking and Editing Destinations

Check and edit a selected destination.

Display the screen.

Specify the destination.

Select [

Check

Check and edit the destination.

To add a new destination, select

[

]

To display details for the destinations, select [

]. New E-mail addresses and PC folders can

be edited if they have been specified.

To delete the selected destination, select

[

Specifying Destination (page 5-20)

NOTE

• When selecting [

] for Entry Check for New Destination, the confirmation screen

appears. Enter the same host name and path again, and select [

Entry Check for New Dest. (page 8-22)

• When selecting [

] for Destination Check before Send, the confirmation screen appears

after pressing the [

Start

] key.

Dest. Check before Send (page 8-22)
Confirmation Screen of Destinations (page 5-26)

Summary of Contents for ECOSYS M3860idn




































































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS M3860idn

Reviews:

Related manuals for ECOSYS M3860idn

Brands by name

Popular brands

Kyocera ECOSYS M3860idn, Operation Manual

Search results

Summary of Contents for ECOSYS M3860idn

Reviews:

Related manuals for ECOSYS M3860idn

Brands by name

Popular brands