Kyocera E-56, User Manual

Page: 11 / 100

User Guide 11
Phone Battery
Install the Battery
1. Hold the phone face
down.
QU
AL CO
MM
3
G CD
MA
2. Using your thumbnail,
press and hold the latch
to release lock then
slide the back cover
down to remove.
3. Insert the battery
with the metal
contacts facing those
on the device.
4. To replace the back
cover, align then
slide the back cover
until it snaps into
place.
QU
AL
CO
MM
3 G
CD MA
Remove the Battery
1. Make sure the device is turned off.
2. Remove the back cover.
3. Insert your finger
into the grip then lift
to remove the
battery.
Charge the Battery
1. Connect the AC
adapter to the USB
connector on the side
of the device.
2. Plug the adapter into
a wall outlet.
The LED indicator and the battery icon in the
upper-right corner of the screen indicate the
battery status:
LED Indicator Battery
icon
Battery status
Solid RED Battery is charging
Flashing RED Battery is low.
Solid GREEN Battery is fully
charged.
You must have at least a partial charge in the
battery to make or receive calls. You can safely
recharge the battery at any time, even if it has a
partial charge.
Warning:
• Do not remove the battery while it is
charging.
• Always remove the AC adapter from the
wall outlet first before removing the USB
cable from the device.