Kyocera DuraXV LTE Verizon, User Manual

Page: 117 / 152

Tools and Calendar 107
If Bluetooth is not switched on, select Bluetooth > On to turn Bluetooth on. Your phone 2.
will show a list of nearby Bluetooth devices.
If you don’t see your device listed, press the Right soft key
[Options] > Refresh . 3.
Your phone will start to scan for Bluetooth devices within range.

Make sure that the headset is discoverable, so that your phone can find the headset.
Refer to the instructions that came with the headset to find out how to set it to
discoverable mode.
When you see the name of your headset displayed on the Bluetooth devices list, 4.
highlight your headset and press the Center soft key [Connect] . Your phone then
automatically tries to pair with the headset.
If prompted, enter the passcode supplied with your headset, and then press the Left soft 5.
key [Pair] .

To change the connection settings, highlight the paired device and press the Left soft
key [Edit] :
▪
Rename to change the device name
▪
Usefor to set the connection type
▪
Forget to remove the connection
The pairing and connection status is displayed below the hands-free headset or car kit name in
the Bluetooth devices list. When the Bluetooth headset or car kit is connected to your phone,
the Bluetooth connected icon is displayed in the status bar. Depending on the type of
headset or car kit you have connected, you can then start using the headset or car kit to listen to
music or make and receive phone calls.
Note: Due to different specifications and features of other Bluetooth-compatible devices,
display and operations may be different, and functions such as transfer or exchange
may not be possible with all Bluetooth-compatible devices.
Reconnect a Headset or Car Kit
When you have paired a headset with your phone, you should be able to reconnect it
automatically by turning on Bluetooth on your phone and then turning on the headset. However,
sometimes you will need to reconnect manually, for example if you have been using your
headset with another Bluetooth device.
From the Idle screen, press the Center soft key [Menu] > Tools & Settings > 1.
Settings > Wireless & networks > Bluetooth .