![Kyocera Dura Force Ultra 5G User Manual Download Page 101](http://html.mh-extra.com/html/kyocera/dura-force-ultra-5g/dura-force-ultra-5g_user-manual_2016155101.webp)
Settings
89
Swipe:
There is no security using the Swipe option.
Pattern:
There is Medium security using a Pattern. Follow the onscreen instructions
to set.
PIN: There is Medium to High security using a number of 4 or more digits. Follow
the onscreen instructions to set.
Password: There is High security using a strong password. Follow the onscreen
instructions to set.
Tap
displayed near
Screen lock
to configure the screen lock settings.
Screen lock settings
You can increase the security of your phone by creating a screen lock.
NOTE:
The available Screen lock settings may vary depending on the screen lock option you
have selected.
►
From the Apps launcher, tap
Settings
>
Security
>
next to
Screen lock
.
Make pattern visible
You can hide the trace of your pattern as you draw it. This setting appears only when you set
Screen lock type to Pattern.
Lock after screen timeout
Sets the time delay to activate the screen lock feature after the device enters sleep mode. This
setting is available only when you have enabled one of the lock settings.
Power button instantly locks
Activates the screen lock feature by pressing the Power key. This setting appears only when
you set one of the lock settings.
Lock screen message
You can create a desired message to display on the locked screen.
Fingerprint
Enabling this option allows you to touch the fingerprint sensor to unlock the screen. Follow the
onscreen instructions to set.
IMPORTANT:
Fingerprint authentication technology does not guarantee completely accurate
personal authentication and identification. Kyocera assumes no responsibility for
any damages resulting from a third party using your device or inability to use your
device.
NOTES:
•
Please remove the USB cable prior to registering your fingerprint for authentication.