Kyocera Copystar CS 3011i, Service Manual

Page: 119 / 772

2RG/2RH
1-3-36
Contents
Adjust the leading edge registration or center line.
Purpose
Executed if there is a regular error between the leading edges of the copy image and original.
Adjusted if there is a regular error between the center lines of the copy image and original.
Method
1.Press the [Start] key.
2.Select the item to adjust.
*: The screen for adjusting is displayed.
Adjustment: LSU Out Top Full
1.Select the item to adjust.
2.Press the [System Menu] key.
3.Press the [Start] key to output a test pattern.
4.Press the [System Menu] key.
5.By using the [+] [-] keys or the numeric keys, change the setting value.
For the test pattern 1, increase the value.
For the test pattern 2, decrease the value.
*: When the setting value is increased, the image moves backward, and it moves forward when the set-
ting value is decreased.
Figure 3-5
6.Press the [Start] key to set the setting value.
U034 Paper timing data adjustment
(Message: Adjust Paper Timing Data)
Items Contents
LSU Out Top Full Adjust the leading edge timing of full speed output
LSU Out Left Adjusts the center line
Items Contents Setting range Initial
setting
Data
varia-
tion
Cassette Adjusts the leading edge timing for cas-
sette feed -128 to 127 15 0.1mm
MPT Adjust the leading edge timing for the MP
tray -128 to 127 15 0.1mm
Duplex Adjust the leading edge timing for the
duplex paper feed -128 to 127 15 0.1mm
Correct image Output
example 1
Output
example 2
Leading edge
registration
(20 ± 1.0 mm)