21
Saf
ety P
recautions
●
Do not forcefully press, tap or intentionally subject the display
to strong impact. Doing so might cause scratching or damage.
●
Do not forcefully press your fingernails, sharp objects, or
hard objects against buttons or display surface. Doing so
may cause scratching or damage.
●
The touch panel is designed to be lightly touched by
fingers. Avoid pressing forcefully or using sharp objects
(fingernail, ballpoint pen, pin, etc.).
●
Never use the modified product. Use of a modified device
violates the Radio Law and Telecommunications Business
Law.
The product has acquired such certification as conformity
with technical regulations for a specified radio station based
on the Radio Law and conformity with technical regulations
for a terminal device based on the Telecommunications
Business Law, and the "Technical Conformity Mark " can
be confirmed internally in the au mobile phone.
Home screen
→
[Settings]
→
[More]
→
[Compliance
information]
If the modification is made to the internal components, the
certifications of conformity with technical regulations will
become invalid. Never use the product without these
certifications valid. Doing so violates the Radio Law and
Telecommunications Business Law.
●
Take care not to place magnetized items such as magnetic
cards, speakers and TV sets near the product as it might
cause malfunction.
Putting strong magnetism close to the product might cause
false operation.
●
Do not bring magnetized cards such as cash cards, credit
cards and prepaid cards closer to the product. Doing so
may result in loss of recorded information.
●
When you put the product in your pocket or bag, take care
so that the display does not come in contact with metal
objects or other hard objects. Not doing so may cause
scratching or damage. Straps with metal or other hard
parts that may come in contact with the display may cause
scratching or damage.
●
When suddenly brought into a warm place from a cold place,
or when in a humid location, or when used where
temperature suddenly changes (e.g. near the air discharge
port of an air conditioner), water droplets (i.e. condensation)
sometimes are formed inside the product. Note that when
used under conditions such as this, humidity might cause
corrosion or a fault.
●
Camera lens or inside of the display may mist over
(dew formation) because of usage environment such as
temperature or humidity. This is not malfunctioning or
abnormal.
CB70_EN.indb 21
2020/02/07 13:41:13
