Kyocera 5003i, Operation Manual

Page: 470 / 708

9-3
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
1
Display the screen.
1
[ System Menu/Counter ] key > [ User Login/Job Accounting ]
2
"User Login Setting" [ Next ] > "User Login" [ Change ]
2
Configure the settings.
1
Select [ Local Authentication ] or [ Network Authentication ].
Select [ Off ] to disable user login administration.
If you select [ Network Authentication ], select [ NTLM ], [ Kerberos ] or [ Ext. ] as the server
type. In addition, enter the domain name (256 characters or less) and default host name
(256 characters or less) for the Authentication Server.
Select [ Add/Edit ] to enter the domain name. The domain registration list appear. Select
[ Add/Edit ], and enter the domain name. Up to 10 domain names can be registered.
When selecting [ Ext. ] as the server type, enter the port number.
Item Descriptions
Local Authentication User authentication based on user properties on the local user list
stored in the machine.
Network
Authentication User authentication based on Authentication Server. Use a user property
stored in Authentication Server to access the network authentication login
page.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login ]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
NOTE
• If two or more domains are registered, select [ Default Domain ] and select the default
domain.
• Checking "Use Multiple Authentication Server" allows you to register a primary server
and a secondary server for each domain. Once this setting is done, network
authentication will be done in the order of a primary server and a secondary server
registered in the specified domain at the time of log-in.
• The network authentication will be done to the server set as [ Default Host Name ]
before the primary server set for each domain.
Model Name Login User Name Login Password
TASKalfa 5003i 5000 5000
TASKalfa 6003i 6000 6000