Kyocera 5003i Operation Manual Download Page 183

Page: 183 / 708

3-40

Preparation before Use > Registering Destinations in the Address Book

Check if the selected destination was added to the group >

[Save]

The group is added to the Address Book.

To register the registered address in a one-touch key, select [

Save

] > [

Yes

]

Editing Address Book Entries

Edit the destinations (contacts) you added to the Address Book.

Display the screen.

[

System Menu/Counter

] key > [

Edit Destination

] > "Address Book" [

Add/Edit

]

Select a destination or group to edit > [

Detail

]

Edit the destination.

Editing a Contact

Change "Name", "Address Number" and destination type and address.

[

Save

] > [

Yes

]

Add a destination to a group

Change "Name" and "Address Number".

[

Member

] > [

Add

]

After you have completed the changes, [

Save

] > [

Yes

]

To delete any destination from the group

[

Member

] > Select the delete destination > [

Delete

] > [

Yes

]

After you have completed the changes, [

Save

] > [

Yes

]

NOTE

Refer to the following for registering the One Touch Key.

Adding a Destination on One Touch Key (One Touch Key) (page 3-42)

NOTE

Destinations can be sorted or searched by destination name or address number.

Specifying Destination (page 5-43)

Adding a Destination (Address Book) (page 3-35)

Add the group (page 3-39)

Summary of Contents for 5003i





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5003i

Reviews:

Brands by name

Popular brands

Kyocera 5003i, Operation Manual

Search results

Summary of Contents for 5003i

Reviews:

Brands by name

Popular brands