Kyocera 358ci, Operation Manual, Page: 351 / 661

6-68
Using Various Functions > Functions
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [ Finish Scan ].
Select [ On ] to use continuous scanning. To use Job Build, select [ Job Build ]. You can set the functions that appear on
the screen during scanning.
( Value : [ Off ] / [ On ] / [ Job Build ])
Job Build
When [ Job Build ] is selected when copying or printing, the binding orientation for finished documents can be selected
from [ Binding Left ], [ Binding Right ] or [ Binding Top ].
The following functions can be selected during scanning.
Negative Image
Inverts black and white portions of the image for printing.
( Value : [ Off ] / [ On ])
Mirror Image
Copies the mirrored image of the original.
( Value : [ Off ] / [ On ])
Advanced
Setup Advanced
Setup
Functions Functions
Item Description
Next Copy: On Back In duplex copying, prints on the back side if the next page is to be printed on the front
side. Select [
On Back ] to use this function.
Next Copy: On Front In duplex copying, prints on the front side if the next page is to be printed on the back
side. Select [
On Front ] to use this function.
Sheet Insertion Inserts a blank paper in the next page. Select [ Sheet Insertion ] to use this function.
Advanced
Setup
NOTE
This function is only available for black and white copy mode.
Advanced
Setup
Copy Send
Custom
Box
USB
Drive
1~10
1
1~30
1
11~20
11
21~30
21
Copy
Copy