Kyocera 358ci, Operation Manual

Page: 123 / 661

2-53
Installing and Setting up the Machine > Installing Software
Custom Install
The following procedure is an example for installing the software in Windows 10 using [ Custom Install ].
1
Insert the DVD.
2
Display the screen.
3
Select [Custom Install].
4
Install the software.
1
Select the device to be installed.
NOTE
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "
Welcome to the Found New Hardware Wizard " dialog box displays, select
[ Cancel ].
• If the autorun screen is displayed, click [ Run setup.exe ].
• If the user account management window appears, click [ Yes ] ([ Allow ]).
IMPORTANT
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port
name. Installation may fail if the host name is specified.
1 Click [ View License Agreement ]
and read the License Agreement.
2 Click [ Accept ].
1
2
1
2