Kyocera 1102RX3NL0, Operation Manual

Page: 65 / 242

2-34
Installing and Setting up the Machine > Installing Software
5
Finish the installation.
When " Your software is ready to use " appears, you can use the software. To print a test
page, click the " Print a test page " checkbox and select the machine.
Click [ Finish ] to exit the wizard.
If a system restart message appears, restart the computer by following the screen prompts.
This completes the printer driver installation procedure.
Custom Install
The following procedure is an example for installing the software in Windows 8.1 using [ Custom Install ].
1
Insert the DVD.
NOTE
When you have selected [ Device settings ] in Windows XP, the dialog box for device setting
will appear after [ Finish ] is clicked. Configure the settings for options installed on the
machine. Device settings can be configured after the installation is completed.
Printer Driver User Guide
NOTE
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "
Welcome to the Found New Hardware Wizard " dialog box displays, select
[ Cancel ].
• If the autorun screen is displayed, click [ Run setup.exe ].
• If the user account management window appears, click [ Yes ] ([ Allow ]).