Kyocera 1102RX3NL0, Operation Manual

Page: 144 / 242

6-21
Setup and Registration (System Menu) > System Menu
Power Off Timer (models for Europe)
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Device Common ] > [ ► ] key > [ ▲ ] [ ▼ ] key > [ Power Off Timer ] > [ ► ] key
Disp. Status/Log
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Device Common ] > [ ► ] key > [ ▲ ] [ ▼ ] key > [ Disp. Status/Log ] > [ ► ] key
Low Toner Alert
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Device Common ] > [ ► ] key > [ ▲ ] [ ▼ ] key > [ Low Toner Alert ] > [ ► ] key
Item Description
Power Off Timer Select whether to turn off the power automatically after a period of inactivity.
Value : 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,
2 days, 3 days, 4 days, 5 days, 6 days, 1 week
Item Description
Disp. Status/Log Set the display method of the Status/Log.
If the ID card authentication is enabled, this setting is applied when you refer to the print job or
print job log from Command Center RX.
JobsDetailStatus Value : Show All, My Jobs Only, Hide All
Jobs Log Value : Show All, My Jobs Only, Hide All
Item Description
Low Toner Alert Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
Value : Off, On
Low Toner Alert: Set the toner level for notification of low toner.
The setting range is 5 to 100% (in 1% increments). Displayed when
[Off/On] is set to [On] and the [
▼ ] key is selected.
NOTE
Selecting [ Off ] alerts you low toner when the amount of remaining toner becomes 5%.