Kyocera 1102RX3NL0, Operation Manual

Page: 141 / 242

6-18
Setup and Registration (System Menu) > System Menu
Buzzer
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Device Common ] > [ ► ] key > [ ▲ ] [ ▼ ] key > [ Buzzer ] > [ ► ] key
Set options for buzzer sound during the machine operations.
RAM Disk Mode
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Device Common ] > [ ► ] key > [ ▲ ] [ ▼ ] key > [ RAM Disk Mode ] > [ OK ] key
SD Card
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Device Common ] > [ ► ] key > [ ▲ ] [ ▼ ] key > [ SD Card ] > [ ► ] key
Format an SD/SDHC memory card.
A new SD card must be formatted before it can be used in the machine.
Item Description
Key Confirmation Emit a sound when a key is selected on the operation panel.
Value : On, Off
Job End Emit a sound when a print job is normally completed.
Value : On, Off
Ready Emit a sound when the warm-up is completed.
Value : On, Off
Error Emit a sound when errors occur.
Value : On, Off
Item Description
RAM Disk Mode A RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Mode: On, Off
RAM Disk Size: The setting range varies depending on the amount of memory installed
and the option memory usage setting.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
IMPORTANT
Formatting will destroy any existing data on a storage device including a used SD card.