Kyocera 1102R73AS0, Operation Manual, Page: 196 / 426

5-31
Operation on the Machine > Send to Me (E-mail)
Send to Me (E-mail)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
Configuring Settings before Sending
• To use this function, the function icon must be displayed in the home screen.
Editing the Home Screen (page 2-13)
Sending a document to the mail address of the logged
in user
1
Select [Home] key.
2
Select [Send to Me (E-mail)] .
NOTE
• To use this function, user control must be set to network authentication and the e-mail address of the user must be
registered in the network authentication server.
• For the procedure for setting an e-mail address, check with the administrator for network authentication server
users.
NOTE
If the e-mail address is not registered in the network authentication server, e-mail cannot be sent.