106-03-003
©
2019 KYOCERA Corporation
No.
: 205-03-330
取 扱 説 明 書
INSTRUCTION MANUAL
1001
Series
圧着工具 Crimping Tool
06 1001 103
O
EDN19089
2019/04/15
H. Yoneno
M. Isoe
Y. Shimizu
NO
EDN/DCN
DATE
PREPARED by
CHECKED by
APPROVED by
Page 1: ...6 03 003 2019 KYOCERA Corporation No 205 03 330 INSTRUCTION MANUAL 1001Series Crimping Tool 06 1001 103 O EDN19089 2019 04 15 H Yoneno M Isoe Y Shimizu NO EDN DCN DATE PREPARED by CHECKED by APPROVED...
Page 2: ...into or removing it from the tool do not hook the contact on the cable stopper or the anvil Or the contact could be deformed When binding wires loosen the wires so that no stress could be applied to...
Page 3: ...20cm approx of the terminal on the guide and set the part to be crimped to the center of the crimping position appropriately 2 Slightly hit the wire stripped in the appropriate length against the mov...