© 2020 Kymeta Corporation. All rights reserved.
16
08 December 2020
700-00121-000 revD Kymeta u8 products installation and user guide
5.5
Set up the u8 terminal secondary SIM
In the u8 terminal configuration, you have the option to install a second SIM for terrestrial communications. To install a
second SIM card, do the following:
1.
Remove the shroud access panel as described in
2.
Use a screwdriver to remove the SIM cover.
3.
Insert the second SIM in slot 2 by sliding the metal lock
mechanism to the “open” position. Flip out the empty SIM card
holder “2” and insert the second SIM.
4.
Return the SIM holder to its original position ensuring that the
card is aligned properly and that the electronic pad of the card
mates with the contacts on the terminal. Then, slide the metal
locking mechanism back into position.
5.
Attach the SIM cover with the four M4 x 6 mm screws.
6.
Attach the access panel with the two captive pan washer screws M6×16mm. Use a T20 Torx drive.
7.
Enable second SIM WAN through Kymeta Access application or portal or contact Kymeta customer support.
Adjust priority between all SIMs and satellite through the Kymeta Access application.
