© 2020 Kymeta Corporation. All rights reserved.
10
08 December 2020
700-00121-000 revD Kymeta u8 products installation and user guide
2.2
Cabling considerations
The u8 terminal comes with the Ethernet jumper cable that extends the Ethernet connection outside of the shroud.
For more information on u8 cabling and the u8 products cable extension kit, see
Appendix A. Kymeta u8 terminal
The u7-to-u8 terminal upgrade kit ships with the u8 customer Ethernet cable (25' length). If you want to use this
LAN connection, you need to remove the shroud and install the Ethernet jumper cable.
The u7-to-u8 terminal upgrade kit ships with a power jumper cable. If you want an AC solution, you need to
purchase the AC-to-DC power kit (U8ACC-00002-0).
If you are replacing a u7 terminal mounted on a vehicle, consider purchasing a u8 vehicle power kit (U8ACC-
00001-0).
2.3
Power considerations
The u7 is configured by default to be used with an AC power via the I/O box or onboard power supply and requires
a 40 VDC power source.
The u8 is configured by default to use a DC power source and requires a 12 VDC to 36 VDC power source. To use
an AC power source for the u8, purchase the AC-to-DC power kit (U8ACC-00002-0).
For more information on the power specifics of the u8, refer to
5.1.2 AC power source instructions
2.4
u7 product disposal
If you want to dispose of your u7 product, follow your local disposal regulations.
2.5
u7 product warranty
Warranty for the u7 is terminated 30 days after the u8 ships.
