KYMCO MXU 700i, Owner'S Manual

Page: 49 / 164

OTENTIAL HAZARD
Improper use of the locking steering.
WHAT CAN HAPPEN
The ATV could cause loss of control or overturn.
HOW TO AVOID THE HAZARD
Always be sure you have released the locking
steering handlebar and steering lock key is taken
out before you begin to ride.
Never lock the steering handlebar, when the engine
is starting.
4.15. DRIVE SELECT LEVER
The drive select lever is used to shift your ATV into
the low, high, neutral, reverse and park positions.
Refer to CH 5.1.1 for drive select lever adjustment
and operation.
(L) Low (R) Reverse
(H) High (P) Park
(N) Neutral
NOTE
：
Apply the rear brake and shift the shift lever into P
position before turning off the engine when
parking the vehicle on an incline if you park on an
incline with shift lever in H, L or R position, vehicle
weight will make it difficult to shift into neutral.
If the other system isn’t a 12-volt system or with a
negative ground, both vehicles can be damaged.
41