KYMCO MXU 500i, Manual, Page: 73 / 171

5-11
5.8. THROTTLE LEVER
Check to see that the throttle lever operates correctly. It must
open smoothly and spring back to idle position when released.
Repair as necessary for proper operation.
5.9. FITTINGS AND FASTENERS
Always check the tightness of chassis fittings and fasteners
before a ride. Take the machine to a KYMCO dealer or refer to
the Service Manual for correct tightening torque.
5.10. LIGHTS
Check the headlight and taillight to make sure they are in
working condition. Repair as necessary for proper operation.
5.11. SWITCHES
Check the operation of the headlight switch, engine stop switch
and any other switches. Repair as necessary for proper
operation
5.12. BATTERY CUT OFF SWITCH*
*T3b MODELS ONLY
The battery cut off switch is located at the right side of the
vehicle.
With the battery cut off switch, all electrical circuits of the
vehicle can be disconnected from the battery. Then, the
electrical circuits cannot be switched on again via the ignition
switch.