KYLAND KGW3204, User Manual, Page: 30 / 44

26
Import/Export Parameters:
•
Export Config . File: to export the configuration file of the device
•
Import Config . File: to import the modified configuration file of the device
•
Upload Status: the progress bar of uploading file
4.8 Upgrade Firmware
The Upgrade Firmware page is where the
gateway’s firmware can be upgraded, and the “Upload Status” is
the progress bar of upgrading firmware. After the upgrade is successful, reboot the gateway device and the
system will start with the new firmware.
4.9 Change Password
You can modify the
user’s password in this page (now the default username is
admin , and default password
is admin ).
Password Modify: After input the current password, input the new password twice, then click the
“Save” to
save the changed password.
Security Management: The default set is vistingvisiting to HTTP(Web) Console; After click
“HTTPS”, enable to
visit the HTTPS(Web) Console.
4.10 Load Factory Default
The Load Factory Default page is to reset the gateway to the factory setting.