Kyland Technology (Shanghai) Co., Ltd PTS-DR200 Time Server
- 45 -
Items
Parameters
Description
Default value is PTSTTR/LLN0$dsGOOSE1.
Provide IEC61850 ICD file, the current
default value is made by this ICD file.
Entry
0~31
Set the entry index of GOOSE message.
Range is between 0 and 31.
Default value is 0.
The maximum entry is 32. The 0 is the first
entry. The 31 is the last entry.
Byte
0~31
Set the byte position of entry item
Range is between 0 and 31.
Default value is 0.
The maximum byte of entry is 32. The 0 is
the first byte. The 31 is the last byte.
Bit
0~7
Set the bit position of byte item.
Range is between 0 and 7.
Default value is 0.
The maximum bit of byte is 8. The 0 is the
first bit. The 31 is the last bit.
Press ‘Save’ button to save the current setting when you change setting.
3.6.
System
The WEB management system supports to manage Gateway, Route information and
to backup and restore configuration file, in the same time it also supports firmware
management of PTS-DR200 time server by WEB. Normally, if PTS-DR200 time server
has SNMP features, the SNMP management node will be shown in the left navigation
bar.
Press ‘System’ to go to the system screen on the top of navigation bar.
The screen will be shown as:
