9
DIN-Rail connecting seat in the rear panel of KIEN3016A as seen below;
move the device in the direction of arrow 2 to put the whole Din-Rail into place;
verify the KIEN3016A is firmly mounted on the DIN-Rail, as shown below.
Figure 6 DIN-Rail Mounting
z
Remove KIEN3016A from DIN-Rail
The specific steps are as follows:
Step 1: Place the screwdriver into the hole at the bottom of spring locking
plate; press the plate down to loosen the connection of DIN-Rail and switch,
as shown in arrow 1.
Step 2:Pull the KIEN3016A up in the direction of arrow 2; meanwhile remove
the device from the DIN-Rail along the direction of arrow 3.
Figure 7 DIN-Rail Dismounting