KWS VAROS109, Manual, Page: 77 / 78

Chapter 18 – DataLogger 75
10911 V01.10
18.3 Deleting measurement sets from the device
If the USB stick is in the device, you can enter
MODE
> DataLogger > Directory to access the files saved on the external
memory. The remaining memory capacity of the USB stick can also be seen in percent. For example, the file shown
above takes up 18 KB on a USB stick. With a capacity of 512 MB, approx. 29,000 measurement sets of this type can be
saved.
To delete a file, move the cursor with the arrow keys (Up/Down) onto the file you wish to remove and select ENTER .
The device issues a warning message. This function allows you to remove measurement sets that are no longer needed
on-site, which gives a clearer overview for later evaluations.