manualshive.com logo in svg

KWS AMA310/UMS, Manual, Page: 31 / 62

Share
Download
KWS AMA310/UMS Manual Download Page 31

30  

Chapter 6 - Measuring Mode UMS (Upstream-Monitoring-System) 

AMA 310/UMS V21.0 

After switch-on and if no field instrument is actively measuring in the system, the summary mode is 
active by default. 

6.8.2

 

Displays in the Summary Mode 

The displays during measurements in the summary mode correspond to the displays shown in the 

preceding chapters. There is just a reference to the summary mode in the LC display and in the 
graphics display. 

 

Figure 6-15 Start display of the LC display in the summary mode of the SW 024 (TS output via IP)  

 

Figure 6-16 Graphics screen content in the basic state of the UMS measuring mode with switch 

 

Figure 6-17 LC display at MAX-HOLD request by a field instrument in summary mode 

6.8.3

 

Displays in the Selective Mode 

In  a  cluster-selective  measurement  by  a  field  instrument  the  measuring  system  automatically 

determines the input of the switch to which the field instrument which makes the current measuring 

request is connected. This input will then be exclusively connected to the headend unit. 

 
The displays during measurements in the selective mode correspond to the displays shown in the 

preceding chapters. There is just a reference to the cluster presently connected through to the AMA 

310/UMS in the LC display and also in the graphics display. 

 

Summary of Contents for AMA310/UMS































































Reviews:

No comments