KwikGoal KWIK FLEX 2B1502 Assembly Instructions Download

Page: 1 / 4

NZ457 Rev. 01/08/20

Parts

ASSEMBLY

INSTRUCTIONS

FOR

2B1

502 & 2B1503

KWIK FLEX LITE

GOALS

1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,

notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.

140 Pacific Drive Quakertown, PA 18951

800-531-4252 Kwikgoal.com

2020 Kwik Goal Ltd.

Goal Frame & Net (1)

Carry Bag (1)

Tension Rod (4)

Summary of Contents for KWIK FLEX 2B1502

Page 1: ...that may have occurred during shipping If damage has occurred notify Kwik Goal immediately Lay out all parts Remove all cardboard and packaging immediately Wet or damp packaging may damage contents 1...

Page 2: ...g pinched in moving parts Open until button locks in place Base Frame Base Frame Center Connector Base Frame Base Frame Center Connector Open until button is engaged Left Base Left Rear Base 3 Open le...

Page 3: ...d at front must go through net pocket and elastic strap Place front tension rods into base holders prior to attaching net loops Tension Rod Base Rear Tension Rod Front Tension Rod Front Tension Rod Re...

Page 4: ...sliding net loop over end of tension rod 6 Connect backdrop corners of net to tension rod in rear by sliding net loop over end of tension rod NZ457 Rev 01 08 20 Net Loop Tension Rod Net Loop Tension R...

Brands by name