K60x User Guide
K60x User Guide
17
5.1
Prepare for Installation
The K60x is shipped in a box with mounting hardware and port caps, and is labeled with
specific device information.
The box for each unit includes:
•
A mounting bracket designed for pipe mount or wall mount and screws.
•
Port caps for unused ports.
•
A label listing the IP and MAC address.
Record the following information before permanently installing equipment at the site.
•
Record the IP and MAC address information found on the temporary peelable label
on the K60x box. The IP address will be used for direct configuration of the K60x.
•
Locate the permanent label on the unit casing and record the information for SN:
(serial number) and HN: (unit name) for future reference.
Optionally, you may purchase a field termination kit for the Harting IP67 connectors. See
the
for assembly instructions. Pipe clamps in several sizes may
be purchased as part of the unit kit. Cables may be purchased pre-assembled in several
lengths. Go to
