Operating Instructions
3
Care and Maintenance
CAUTION:
To avoid damaging the product, never immerse the product in water or other
liquids.
Do not use abrasive cleaners on the product. Dust with a soft cloth using extreme
caution around the blade.
ROTARY TRIMMERS
20100706
1
4
2
Loosen the two screws from
any side of plastic panel
which holds the aluminum
rail.
Carefully remove the old
rotary blade head from the
aluminum bar.
Carefully slide the new rotary blade
head onto the aluminum bar and make
sure that the blade goes along with the
rail properly.
Fasten the two screws to hold the
aluminum rail tightly.
3
How to replace rotary blade head
Installation of hand wheel
(
make sure that the
blade goes along with
the rail properly
)
1. Take out the handle, spring and screw driver provided in the box.
2. Put the spring on the axle of rotary blade head in advance and
put the handle on the axle to hold the spring. And then fasten the
screw tightly. Please refer to the photo below: