Quick Start Guide
CAT5 Extender Receiver
ZET101-RU21 /ZET101-RU22
LEDs / Button / Ports
LED
Color
Status
Description
REMOTE
Yellow
On
Indicating the Transmitter is connected to the Receiver.
Red
On
Indicating the Transmitter is selected.
Flash
Indicating the Transmitter is selected, but the Transmitter is not
connected to the Receiver.
LOCAL
Yellow
On
Indicating the local computer is connected to the Receiver (PC/KVM
port).
Red
On
Indicating the local computer (PC/KVM port) is selected.
Button
Description
SELECT
Press this button to switch between REMOTE (Transmitter) and LOCAL (Receiver) site.
Port
Description
DC/12V
for connecting to the power adapter
CONSOLE
for connecting to monitor, USB type keyboard and mouse
PC/KVM
for connecting to the local host PC or KVM switch via the 2-in-1 VGA cable
LAN
for connecting to a CAT5 cable
Hardware Connections
Refer to the diagram below to connect the Receiver to the Transmitter Module. It is recommended to
power off all the computers and server before the installation.
1. Connect the Transmitter Module and Receiver with a Cat 5 cable (not included in the package).
The cable can be up to 150 meters (500 feet, ZET101-RU21) or 300 meters (1000feet,
ZET101-RU22) long.
2. Connect the local console device (keyboard, monitor and mouse) to the Console ports on the
rear panel of the Receiver.
3.
Plug the power adapter into an AC outlet and plug the adapter's power cable into the Receiver’s
Power jack.
Package Contents
1 x KVM Extender-Receiver
1 x CD (QSG)
1 x DC12V/1A AC to DC Power Adapter
1 x Desiccant