KVM-TEC Smartline SVX1, User Manual, Page: 27 / 36

52 | kvm-tec kvm-tec | 53
4. Network SettiNgS 4. Network SettiNgS
4.6 INsTALLINg DUAL-hEAD OR MULTI-hEAD sysTEM
If you are using multiple monitors with one PC, you can combine individual local/CPU and
remote/CoN units in the multi-head menu so that they can be switched as one unit.
Individual grouping of local (CPU) and remote (CON) extenders:
1. Make sure that the Master View menu is open (see chapter „Network - Networking“).
Settings - „Master View and Network Mode“)
2. Press M. The Multi Head configuration menu opens.
3. Press the A key. The multi-head detail menu opens.
• Press the R key to remove an extender from the multi-head set.
• Press the Q key to exit.
4. Press the A key to add individual extenders. The extender type is automatically determined
once the first extender has been selected.
5. Press the E key to edit the multi-head set name of max. 16 characters.